Resin based 3D printers
Lumi Industries is a solid Italian reality, which over the years has specialized in the design and construction of resin based 3D printers, with the aim of bringing make 3D printing available to everyone
It is an Ideal resin for casting pieces of art, Toy models, machine parts. The fully cured resin has a hardness of 73 shore D.
Our resin is up to 8 times cheaper than traditional castable resins.
A DLP Printer with a 180 watt lamp will cure a 0.05mm layer in approximately 2 seconds. A 240 watt lamp will cure a 0.05mm layer in half a second. With the Castable Blend resin you have hardening times among the fastest of all the resins on the market.
The Castable Blend resin comes ready to use with pigments already optimised and mixed in.
After initial calibration, there is nothing else to worry about. Special formulation has brought down average shrinkage on these resins to approximately 0.5% (the industry average is 3.5%).
The Castable Blend resin have a very faint odour and cause minimal skin irritation as compared to other resins.
When fully cured the Castable Blend resin has a hardness of approximately 75 shore D (what does this mean?). Castable Blend resin has also been tested and proven to withstand a myriad of different chemicals including water, acetone, alcohol and thinner. Find out more here.
Store the resin in a dry, cool, shaded place out of direct sunlight.
Do not soak in IPA or water (the resin is hydrophobic). Do not place in an ultrasonic bath.
More information about Standard Blend is available at FunToDo.
|Viscosity||at 25°C||85 mPa.s|
|Hardness (Shore D)||73|